- Posted by alex@engineeredsource.com
- On May 12, 2016
- 0 Comments
These are partially threaded custom machine screws supplied to our customer at 30,000 pieces. The part is made using 18-8 stainless steel and is slightly tapered at the point to allow for faster use in the customer’s application. The head is a slightly off-standard pan head with a phillips drive. Parts are made in the United […]
Read More
- Posted by alex@engineeredsource.com
- On May 6, 2016
- 0 Comments
These are 2-56 X .625 inch custom slotted fillister head machine screws in 18-8 stainless steel material, made in the USA at a relatively small quantity batch of 500 pieces. Parts are provided to our aerospace customer with a AS9102 compliant First Article Inspection Report (FAIR) and a number of required certificates. Domestically made, these custom […]
Read More
- Posted by alex@engineeredsource.com
- On April 16, 2016
- 0 Comments
These are metric custom flat head machine screws manufactured in the USA, made using straight hardened steel with black oxide finish. Measuring M8 X 1.25 X 45MM, this machine screw has a 6-lobe drive and a modified blat head. Custom machine screws to print like this modified flat head can be provided on as-released or as-ordered basis to […]
Read More
- Posted by alex@engineeredsource.com
- On April 16, 2016
- 0 Comments
These are 1/4-28 X .571 dime slotted custom undercut machine screws manufactured by a US based manufacturer we have worked closely with for more than two decades, made using 4037 steel and further processed with glass bead and rust inhibitor for optimal performance in our customer’s application. Parts like this typically carry a lead time of 6-10 […]
Read More
- Posted by alex@engineeredsource.com
- On April 16, 2016
- 0 Comments
These are special 7/16-20 hex head custom left hand bolts that we have been supplying the same customer for over 5 years. It incorporates a special marked stamp per the customer’s print and is manufactured using 1018 cold rolled steel, which is carburized to 1700 degrees, soaked for 2 hours, and oil quenched. Like many of the […]
Read More
- Posted by alex@engineeredsource.com
- On April 16, 2016
- 0 Comments
These are small 4-40 X 5/16 custom copper machine screws supplied at just 100 pieces. Small quantity custom fastener orders like this are a daily routine for us and we can supply specials to print in just about any material. Copper 110 material was used on this specific custom flat head machine screw and we were […]
Read More
- Posted by alex@engineeredsource.com
- On April 16, 2016
- 0 Comments
Engineered Source offers a variety of secondary services for both standard and custom fasteners, with additional detail available at http://www.engineeredsource.com/customized-special-fastener-supplier-orange-county-ca-s/108.htm. Chrome plating is typically done either in barrel form for larger quantities or by individually hanging the fasteners, which is significantly more expensive. For parts that serve a critical aesthetic function, like screws on musical instruments, […]
Read More
- Posted by alex@engineeredsource.com
- On April 16, 2016
- 0 Comments
We supply these custom slotted round machine screws to our aerospace/defense customer after having it cadmium or zinc plated, typically at quantities between 1,000 and 3,000 pieces. This part is made in the USA and is provided with full certs, including DFAR, material, FAIR, and Certificates of Conformance. Lead time is typically 6-8 weeks from order […]
Read More
