- Posted by alex@engineeredsource.com
- On August 26, 2016
- 0 Comments
These are custom shoulder bolts with a hex head in grade 5 steel, made in the USA and finished with commercial zinc with bake and clear chromate sealant. The bolt measures 5/16-18 X 1-1/4 and is supplied on an annual blanket order basis to our US based customer. With large volume orders of similar custom shoulder […]
Read More
- Posted by alex@engineeredsource.com
- On August 25, 2016
- 0 Comments
These are custom hex washer head machine screws we supply our long time customer on an as-needed basis every two years or so at approximately 40,000 pieces per order. It is a M4-0.70 X 9.5MM phillips slotted combo drive hex washer head machine screw made using steel material with black oxide and light oil per […]
Read More
- Posted by alex@engineeredsource.com
- On August 12, 2016
- 0 Comments
Custom thread rolling and custom thread cutting screws are the most common types of custom fasteners we supply – this is a custom #10-12 X 1″ phillips square combo drive thread cutting screw made in the USA using 302 stainless steel. A type 17 point is incorporated to our customer’s specifications and the parts are run […]
Read More
- Posted by alex@engineeredsource.com
- On July 14, 2016
- 0 Comments
We supply a large number of custom trilobular thread forming screws like this #10-32 X 3.72″ unslotted indented hex washer head trilobular screw to our vast customer base. This specific part has been supplied to the same customer for over five years and is sold on a blanket purchase order basis. It is manufactured in Taiwan using […]
Read More
- Posted by alex@engineeredsource.com
- On June 28, 2016
- 0 Comments
We supply custom captive screws in both small and large quantities. This is a custom 8-32 X .47 slotted fillister captive screw made using 304 stainless steel. It is manufactured in the United States and can be supplied to order in as few as 10 pieces. Larger quantities can also be set up with blanket […]
Read More
- Posted by alex@engineeredsource.com
- On June 23, 2016
- 0 Comments
We supply a number of different tamper proof fastener types in a variety of materials, both standard off the shelf parts and special to print fasteners like this one way round head machine screw. These custom one way round tamper proof machine screws are 4-40 X 1/4 and were manufactured in the United States using 302 […]
Read More
- Posted by alex@engineeredsource.com
- On June 17, 2016
- 0 Comments
These are M6 X 1.0 X 60MM custom hex cap screws that are fully threaded per customer’s specifications and manufactured in the United States using 410 stainless steel. Parts are then heat treated for required hardness. A similar part is supplied for the same customer at M5 diameter, which will be shown as a separate entry. […]
Read More
- Posted by alex@engineeredsource.com
- On June 13, 2016
- 0 Comments
These are M5 X 0.8 X 60MM custom metric hex cap screws that are fully threaded per customer’s specifications and manufactured in the United States using 410 stainless steel. Parts are then heat treated for required hardness. A similar part is supplied for the same customer at M6 diameter, which will be shown as a separate […]
Read More
- Posted by alex@engineeredsource.com
- On June 1, 2016
- 0 Comments
These are custom captive screws measuring 10-32 X 2-3/8 manufactured in the United States using 18-8 stainless steel material. It has a standard pan head with a phillips drive and is partially threaded to act as a captive/panel screw. An o-ring is incorporated on each screw to our customer’s specifications. We have carried this part on […]
Read More
- Posted by alex@engineeredsource.com
- On May 31, 2016
- 0 Comments
These are phillips flat custom metric machine screws (DIN965) measuring M3 X 0.5 X 9MM and manufactured in the USA using steel with zinc and CR+3 sealant . These parts we typically supply to our customer with a production run for each order at the quantity requested, typically around 3,000 pieces. While a variety of M3 X […]
Read More
