- Posted by alex@engineeredsource.com
- On May 5, 2023
- 0 Comments
These custom precision machined shoulder pins were manufactured using 416 stainless steel material for our customer that manufactures scientific measurement instrumentation. The shoulder diameter was set to .311″ +/- .001 and the length under the flange is 1.175″ +.002/-.000. Flange diameter was set to .375″ +.001/-.005 and the thickness at .020″ +.000/-.002. Full certs were […]
Read More
- Posted by alex@engineeredsource.com
- On April 18, 2023
- 0 Comments
These custom slotted T-bolts were manufactured in 316 stainless steel with plain finish based on drawings we created using provided samples. Unlike the typical slotted drive application we see these t-bolts incorporated the slot for marking/indication purposes to signal the position of the head from the back side. Each bolt was wrapped in protective netting […]
Read More
- Posted by alex@engineeredsource.com
- On March 26, 2023
- 0 Comments
We supplied these custom slotted double thread studs to our furniture manufacturing customer. Low carbon steel was used for the production with a black oxide finish. 3/8-16 thread was rolled on each side and the overall length measured at 47.60MM. The part is similar to the hex socket drive version in alloy steel that we […]
Read More
- Posted by alex@engineeredsource.com
- On February 23, 2023
- 0 Comments
These MS21250-02004 12 point flange bolts were manufactured using domestic 8740 AMS 8322P steel material heat treated to AMS 2759/1 F AMS 2759 F to reach hardness of 40-43 HRC. The parts were finished with CAD plating per AMS-QQ-P-416E specification, Type II Class 2. Full certs were provided with the parts to our aerospace customer […]
Read More
- Posted by alex@engineeredsource.com
- On January 21, 2023
- 0 Comments
These custom stainless steel torx drive knurled shoulder screws were manufactured using 304 stainless steel material with factory passivated finish. The shoulder measured 2.29-2.48MM X 19.05 +/- .12MM. 2-56 UNC 2A thread was incorporated at a length of 5.56 +0/-.5MM. A T8 drive was cold formed and the outside of the head aggressively knurled for […]
Read More
- Posted by alex@engineeredsource.com
- On January 17, 2023
- 0 Comments
We had these custom 440C precision machined shaft bushings manufactured using DFARS compliant AMS 5830 material for our aerospace customer, with a passivated finish to ASTM A967. The inside diameter on the bushings was set to .6255 +/- .0005″ and outside diameter to .7528 +/-.0005″, with a width of .185 +/-.002″. Full certs were provided […]
Read More
- Posted by alex@engineeredsource.com
- On November 30, 2022
- 0 Comments
These custom stainless steel socket shoulder bolts were manufactured using 18-8 stainless steel material with factory passivation finish. The head was fully cold formed, which took multiple tooling iterations to get just right. 1/4-20 2A thread was rolled at a length of .575″ underneath the .305-.311″ diameter shoulder. A .190″ across the flats hex socket […]
Read More
- Posted by alex@engineeredsource.com
- On November 18, 2022
- 0 Comments
We provided these custom stainless steel step down precision pins to our utilities customer. It took a few iterations of the design and specifications to dial in the drawing and we then produced these parts using 18-8 stainless steel material with plain finish. Prior to our production our customer was manually assembling this part using […]
Read More
- Posted by alex@engineeredsource.com
- On September 16, 2022
- 0 Comments
These custom 420 stainless steel precision machined components were manufactured for our aerospace customer, with initial samples produced using 18-8 stainless steel for functional testing prior to full production. Overall length was .804 +/- .005″ and the flange outer diameter was set to .396″ +/-.005″. Four drilled holes were incorporated at a diameter of .120″ […]
Read More
- Posted by alex@engineeredsource.com
- On July 29, 2022
- 0 Comments
These custom 316 double thread studs were manufactured domestically using 316 stainless steel material, with a combination of 1/4-28 right hand thread, 1/4-28 left hand thread, 3/8-24 right hand thread, and 10-32 right hand thread with specific tight tolerance machined shoulders specified for each part. Material certs and certificate of conformance were provided with the […]
Read More
