- Posted by alex@engineeredsource.com
- On March 19, 2024
- 0 Comments
These custom stainless steel dowel pins were manufactured in lengths ranging from 2-1/2″ to 9″ and a diameter of 1/8″. 304 stainless steel material was used and the pins were factory passivated after the chamfer was applied on each side.
Read More
- Posted by alex@engineeredsource.com
- On September 28, 2023
- 0 Comments
These custom precision machined headed pins were manufactured using 360 Brass Alloy material per QQ-B-626. Similar to the brass spacer in one of the prior posts this pin had a critical diameter dimension of .039″ +0/-.002″ for the extended pin. The overall length of the part was set to .165″ and the head height at […]
Read More
- Posted by alex@engineeredsource.com
- On September 26, 2023
- 0 Comments
These custom precision machined spacers were manufactured for our electronics customer using 360 Brass Alloy material per QQ-B-626. The small diameter extension pin had the tightest tolerance measuring .038″ +.000/-.002″ while the main body diameter was set to .125″ +/- .002″. Overall length of the spacer is set to .234″. Full certs were provided with […]
Read More
- Posted by alex@engineeredsource.com
- On July 10, 2023
- 0 Comments
We supplied these custom socket drive partially threaded studs to our electronics customer in 316 stainless steel material with plain finish. A cold formed socket 3MM hex drive was incorporated on the threaded side and M6-1.0 thread was rolled to a length of 26MM. The unthreaded side measures 19MM in length and 4MM in diameter […]
Read More
- Posted by alex@engineeredsource.com
- On May 5, 2023
- 0 Comments
These custom precision machined shoulder pins were manufactured using 416 stainless steel material for our customer that manufactures scientific measurement instrumentation. The shoulder diameter was set to .311″ +/- .001 and the length under the flange is 1.175″ +.002/-.000. Flange diameter was set to .375″ +.001/-.005 and the thickness at .020″ +.000/-.002. Full certs were […]
Read More
- Posted by alex@engineeredsource.com
- On November 18, 2022
- 0 Comments
We provided these custom stainless steel step down precision pins to our utilities customer. It took a few iterations of the design and specifications to dial in the drawing and we then produced these parts using 18-8 stainless steel material with plain finish. Prior to our production our customer was manually assembling this part using […]
Read More
- Posted by alex@engineeredsource.com
- On November 18, 2022
- 0 Comments
We had 4 different size variations of these custom airframe double thread 17-4PH precision pins manufactured for our aerospace and defense customer, with all production done domestically in the USA and the raw material DFARS compliant. A combination of M6 X 1.0 and 10-32 UNJF rolled thread was required for each variation. Lead time was […]
Read More
- Posted by alex@engineeredsource.com
- On May 18, 2022
- 0 Comments
We had 50,000 pieces of these custom tapered dowel pins manufactured using 303 stainless steel material for our automotive component manufacturing customer. Overall length was set to 12.56mm +/- 0.3mm and the diameter measured 4mm +.05mm/-.10mm. The tapered point was machined to a 54 +/- degree angle. Full certs were provided with the parts per […]
Read More
- Posted by alex@engineeredsource.com
- On May 13, 2022
- 0 Comments
These custom precision adapter dowel pins were manufactured for our defense customer using 4140 alloy steel material with Rc 38-42 hardness with plain finish. Production was done in the USA and the pins measured .10800″ +/- .00025″ in diameter and .375″ +/-.010″ in overall length. Full certs were provided with the parts per customer’s instructions.
Read More
- Posted by alex@engineeredsource.com
- On April 15, 2022
- 0 Comments
We had approximately 150,000 pieces of these small precision 304 stainless steel dowel pins manufactured for our customer with split scheduled releases. The pins measured 2.93-3.42MM in overall length with a diameter of 2.390MM +0/-.002. Slight 0.25MM radius was applied on both sides to complete the parts. Commercial passivation was performed prior to sorting of […]
Read More
